
Wet Rot Treatment in Cambridge
Identifying and treating timber decay caused by persistent moisture contact — restoring structural integrity.
Wet Rot Treatment in Cambridge
Wet rot is the term used for a group of fungi — most commonly Coniophora puteana (cellar fungus) and Fibroporia vaillantii — that attack and decay timber in persistently damp conditions. Unlike dry rot, wet rot fungi cannot transport moisture through their strand systems; they are entirely dependent on direct contact with a consistent moisture source. This means that wet rot is confined to areas of damp timber and does not spread through masonry or to other parts of the building in the way that dry rot can. However, wet rot can cause equally severe structural damage in the areas it does affect.
The most common locations for wet rot in East Anglian properties are ground floor joists in poorly ventilated sub-floor voids, window frames and sills in contact with damp masonry, and any timber in contact with the ground or damp surfaces. Treatment involves eliminating the moisture source, removing and replacing decayed timber, and protecting sound adjacent timber with a fungicidal preservative to prevent further decay.
Signs to Look For in Your Cambridge Property
- →Timber that is dark brown, darker than surrounding wood, and soft when probed
- →Longitudinal cracking along the grain (as opposed to the cuboidal cracking of dry rot)
- →White or pale mycelium strands in areas of very severe wet rot — less substantial than dry rot mycelium
- →Floor that feels soft, springy, or spongy when walked upon
- →Window frames or sills that feel soft at the bottom or around joints
- →Paint that blisters or fails repeatedly on timber surfaces — indicating persistent moisture beneath
Why Cambridge Properties Are Particularly Affected
Ground floor wet rot in Cambridge's Victorian terraces is typically caused by poorly ventilated sub-floor voids. Many properties in the Romsey and Petersfield areas have had their air bricks blocked by raised path levels or garden soil build-up, causing the floor joists to become permanently damp.
Cambridge sits on chalk and river gravels alongside the River Cam, with clay soils in the lower-lying areas around the southern edge of the city. The water table in central Cambridge and along the Cam corridor is relatively high, and the low-lying meadow areas around Midsummer Common and the Backs are notably damp. Properties near the river and in the Mill Road and Romsey areas are most susceptible.
How We Treat Wet Rot Treatment in Cambridge
Identify and address the moisture source — typically a blocked sub-floor air brick, a leaking pipe, or defective external drainage
Probe all timber in the affected area to determine the full extent of decay
Remove all timber that has lost more than approximately 20% of its structural cross-section
Treat all sound adjacent timber with a fungicidal preservative to prevent further fungal attack
Replace decayed structural timber with pre-treated new timber, ensuring it is not in direct contact with damp masonry
Areas Covered in Cambridgeshire
We provide wet rot treatment throughout Cambridge (CB1, CB2, CB3, CB4, CB5) and the surrounding areas including Trumpington, Cherry Hinton, Newnham, Chesterton, Histon, Impington, Girton, Barton, Grantchester.
Our local inspection team can usually attend within 48 hours. Call 01473 561 031 or use the form to book.
Common Questions About Wet Rot Treatment in Cambridge
Our Cambridge Guarantee
All our wet rot treatment work in Cambridge comes with a long-term written guarantee. Our guarantees are accepted by the majority of UK mortgage lenders and are transferable to new owners on sale of the property.
Related Services in Cambridge
Free Cambridge Inspection
Request an Inspection
Leave us your details and we'll be in touch

